With proper care, your 3D-printed accessories will remain beautiful and functional for a long time. Our parts are generally made for everyday use – a few simple rules help maintain the surface.

Cleaning

    • For cleaning before adhesive work, we recommend isopropanol
    • If necessary, use mild dish soap and lukewarm water
    • Afterward, wipe dry with a soft microfiber cloth

What to Avoid

    • Aggressive cleaners or solvents, such as acetone (can damage the surface)
    • Scouring pads, hard brushes, or polishing pastes (can cause scratches)
    • Unnecessarily high heat exposure (e.g., hot air/steam above 90 °C directly on the component)

Heat & Sun
Our materials are UV-stable. Nevertheless, as with many plastic parts: direct, very strong heat exposure should be avoided. For higher temperature requirements, we prefer to use ASA.

Note on Appearance
Small optical changes due to normal use (e.g., fine micro-scratches from dust or friction) cannot always be completely avoided with accessories in everyday life – but with gentle cleaning, the surface will remain in good condition for a long time.